1. The natural gas coalescing filter element should usually be installed before the regulator and must be installed according to the gas flow direction indicated on it;

2. The natural gas coalescing filter can be installed on horizontal and vertical pipelines, do not install the filter on unstable foundations;

2. The natural gas coalescing filter element is composed of washable synthetic materials. When installing the filter, it is important to ensure that the cover can be easily opened for cleaning and inspection;

4. Before maintenance, please make sure that there is no gas in the natural gas coalescing filter element. Remove the filter, clean it with soapy water, let it air dry naturally, and then reinstall it.

5. After installation, a sealing test must be conducted. During ventilation, the instantaneous gas volume should not be too large. The natural gas coalescing filter element can be cleaned with a trace amount of detergent and water.